Gunsmithing Tools - Hunting and Outdoor Supplies

Forster Gun Screw Assortment Kit NZ$134 (incl. GST) 23 Dozen Screws, Boxed Quantity: The Gun Screw Assortment is a carefully selected assortment of twelve each of our twenty-three most popular screw sizes. This kit is priced substantially less than the cost of buying the same screws individually. This is a great way to be sure you have what you need when you need it. Kit includes tweezers and a handy box for organization.

Forster Head Space Gauges - Each NZ$55 (incl. GST) “GO” “NO GO” “Field” Size : Quantity: Headspace is measured differently depending on whether the firearm’s caliber uses rimmed, belted or rimless cartridges. Choosing the Correct Gage: According to SAAMI (Sporting Arms and Ammunition Manufacturers Institute), who sets product standards for firearms and ammunition, headspace is “The distance from the face of the closed breech of a firearm to the surface in the chamber on which the cartridge case seats. Some shooters are under the misconception that headspace is fixed over the life of the firearm. Headspace can increase after repeated use of ammunition that causes too much pressure. Handloaders should routinely check rifle chamber headspace every thousand rounds. Headspace is measured differently depending on whether the firearm’s caliber uses rimmed, belted or rimless cartridges. Forster offers three lengths of headspace gages per rifle caliber. In order from the shortest to longest, they are: GO, NO-GO and FIELD:

Forster Gun Screws - Per 100 NZ$58 (incl. GST) Quantity: * Quality Assorted Gun Screws - Blued * 3 Head Types - Fillister, Oval and Plug * Thread sizes 6-48, 8-40 and 10-32 * Lengths from 1/8" - 1/2" * Made in the USA These quality Forster Products screws are used by firearms manufacturers and gunsmiths around the world for repairs and replacements. Also used for mounting reciever sights and telescopic sight mounts.

Dembart - Checkering Tools

Dem-Bart Checkering Kits
Dem-Bart Starter Checkering Kit NZ$116 (incl. GST) Size : Quantity: * 3 Tools and 3 extra cutters * Contains tools: S-1, C-1 & a style 2 tool in lines per inch and replacement cutters B- 1, F-1, and style 4 cutter in lines per inch specified. * Kit comes in either 16, 18, 20, 22 or 24 lines per inch. * This is an excellent choice for beginning carvers and craftsmen.

Dem-Bart Master Checkering Kit NZ$158 (incl. GST) Size: Quantity: * 6 Tools * The Master Set contains complete tools in C-1, F-1, S-1 and #2, #3 and #4 tools in the lines per inch specified. All tools are complete and no replacement cutters are included in the Kit. * Kits come in either 16, 18, 20, 22 or 24 lines per inch.

Dem-Bart No. 1 Replacement Cutters
No. 1 Fine Cutter NZ$15 (incl. GST) Quantity: No. 1 Coarse Cutter NZ$15 (incl. GST) Quantity: Used for making the original layout or pattern and to deepen the rows after they are marked in with the spacing tools described below. It is "V" shaped with teeth on both sides or the "V".

Dem-Bart No. 2 Replacement Cutters
No. 2 Cutter NZ$15 (incl. GST) * Sizes: 16, 18, 20, 22, 24, 28 and 32 Size: Quantity: Used for marking the rows and for deepening the rows after they are marked. One blade follows a guide line while the other blade marks the row. Then this tool is moved to the next row it deepens it and again marks the next row. This tool is a combination spacer and deepening tool. Both blades are cutters.

Dem-Bart No. 3 Replacement Cutters
No. 3 Cutter NZ$15 (incl. GST) * Sizes: 16, 18, 20, 22 and 24 Size: Quantity: A left hand spacing tool which has two blades. The right hand blade does not have teeth, instead it is sharp and smooth and will follow a fine guide line. The left hand blade has teeth and cuts the new row as the checkering progresses from the right to the left. Due to the sharp narrow guide blade it is possible to produce very straight rows and consequently exceedingly precise checkering.

Dem-Bart No. 4 Replacement Cutters
No. 4 Cutter NZ$15 (incl. GST) * Sizes: 16, 18, 20, 22 and 24 Size: Quantity: Identical to No. 3, except that the right hand blade is the cutting blade.

Dem-Bart No. B Replacement Cutters
A wide bordering tool which is used to put the final boarder around the layout or pattern. No. B-1 - Wide Cutter NZ$15 (incl. GST) Quantity: A narrow bordering tool which is used to put the final boarder around the layout or pattern. No. B-2 - Narrow Cutter NZ$15 (incl. GST) Quantity:

Dem-Bart No. S-1 Replacement Cutters and Tools
No. S-1 Cutter NZ$15 (incl. GST) Quantity:		No. S-1 Tool NZ$26 (incl. GST) * For tight corners Quantity:

Dem-Bart Skip Line Replacement Cutters
Skip Line Cutter - Left Hand NZ$18 (incl. GST) * Sizes: L9, L10, L11 and L12 Size: Quantity: Skip Line Cutter - Right Hand NZ$18 (incl. GST) * Sizes: R9, R10, R11 and R12 Size: Quantity:

Dem-Bart Triple Line Replacement Cutters
Triple Line Cutter NZ$18 (incl. GST) * Sizes: T16, T18, T22, T24 and T26 Size: Quantity: Used after pattern layout to let down or deepen the diamonds prior to final polish. This cutter has an equalizing effect on the lines per inch to assure an even pattern.

Dem-Bart Stock Oils
Continental Style Stock and Checkering Oil - 2oz NZ$21 (incl. GST) Quantity: Continental Style Stock & Checker Oil is a superior waterproof oil finish for the professional stock finisher and the meticulous hobbyist. Seals and hardens the wood with a low sheen, London type finish. Also appropriate for application on other wood products.

Continental Style Stock and Checkering Oil - 8oz NZ$53 (incl. GST) Quantity: Continental Style Stock & Checker Oil is a superior waterproof oil finish for the professional stock finisher and the meticulous hobbyist. Seals and hardens the wood with a low sheen, London type finish. Also appropriate for application on other wood products.

Waxylene Gun Stock Wax - 2oz NZ$21 (incl. GST) Quantity: Waxylene Gun Stock Wax is applied as a protective finish of gunstock wood and pistol grips. It is easy to apply over the Dem-Bart Oil and gives a waterproof surface, which will not water spot not show finger marks. Polish over your checkering pattern with a soft tooth brush to clean and protect the checkering. Waxylene buffs out with a beautiful sheen.

Other Dem-Bart Tools and Products
Dem-Bart Instruction Booklet NZ$18 (incl. GST) * Fundamentals of Gunstock Checkering Quantity: By Master Stockmaker, Bill McGuire. 13 pages, 5½" x 8½". Softbound. An introduction to checkering for the beginner. Explains each tool's function, guides you in selecting, using them correctly. Shows how to lay out a pattern and finish a checkering job. 34 drawings.

Dem-Bart Veiner NZ$53 (incl. GST) * Available in 60 or 90 degrees Degrees: Quantity: Short, compact veiner puts you closer to your work for firm, no-slip control and all-angle maneuverability when making curved lines, fleur-de-lis or any border work. Perfect for diamond cleanup at border junctions. Tool-steel, V-shaped shaft is curved upward to increase cutting efficiency. Takes and holds sharp edge. Palm-sized handle feels natural…in fact, we couldn't put it down until we'd carved on every piece of good scrap wood in sight!

Dem-Bart Regular Handle and Shank NZ$18 (incl. GST) Degrees: Quantity: Handle fits all Dem-Bart cutters except the short pointer (S-1). Features ergonomic round wooden handle for comfort.

Dem-Bart Layout Guide / Butt Scribe NZ$25 (incl. GST) Quantity: Used to make sure that the checkering pattern is parallel to top line of the forend. Features a fully adjustable marking quill to check both top and bottom lines of the pattern.