|
| Zedteq
Hunting Knives - Handmade in New Zealand |
This following hunting knives have 100 mm - 110 mm blade lengths. All knives are sold with a deep pouch type leather sheath as shown in the photos. Because the knives are quite tight in the sheaths they are made with a brass lined thong hole so a cord lanyard may be used to assist removal from the sheath. Please note that although we try and keep our stock levels high of these knives, there can sometimes be a one-two week delay if they need to be made.
|
| |
|
|
Deep Drop Point NZ$195 (incl. GST)
A 110 mm long blade for users who prefer a deeper than usual drop pointed knife.
Model
# DDP
|
|
Clip Point NZ$195 (incl. GST)
A classic style clip point knife. Blade = approx 110mm.
Model # CLP
Only ONE Left!
|
| |
|
|
The following range of hunting knives have overall blade lengths of approximately 115 mm / 4 1/2 inches. All knives are sold with a deep pouch type leather sheath as shown in the photos. Because the knives are quite tight in the sheaths they are made with a brass lined thong hole so a cord lanyard may be used to assist removal from the sheath. Please note that although we try and keep our stock levels high of these knives, there can sometimes be a one-two week delay if they need to be made.
|
Drop Point NZ$195
(incl. GST)
My "Standard" drop point knife, a popular design. Blade = approx 115mm / 4 1/2 inch.
Model
# DRP
|
|
Raised Drop Point NZ$195 (incl. GST)
A versatile semi-skinner style knife, a larger brother to the 100mm Raised drop point knife. The raised point puts the hand above the work when opening body cavities, while the sweep is useful for skinning. Blade = approx 115mm / 4 1/2 inch.
Model
# RDP
|
| |
|
|
Short boning knife
NZ$195 (incl. GST)
A 115 mm / 4 1/2 inch knife related to the boning knife. The fine point is useful for jobs such as cutting around the vent, the raised point lifts the hand above the the work when opening body cavities, while there is sufficient sweep to be useful for skinning. A versatile, uncommon design. Inletted half tang construction.
Model # SBN
|
|
Banana Hunter NZ$195 (incl. GST)
A raised drop point type knife helps position the hand above the work while opening body cavities. There is still some sweep up to the tip to help with skinning. Blade = approx 115mm / 4 1/2 inch.
Model
# BNN
|
| |
|
|
Gut Hook Drop Point NZ$245 (incl. GST)
A 115 mm long drop point with gut hook. Handle differs from my usual model and has been designed for comfortable use upside down.
Model
# GUT
|
|
|
| |
| Zedteq Skinning and Boning Knives - Handmade in New Zealand |
Zedteq offer two skinning style knives and one utility/boning farmer's knife. All knives are sold with a deep pouch type leather sheath as shown in the photos. Because the knives are quite tight in the sheaths they are made with a brass lined thong hole so a cord lanyard may be used to assist removal from the sheath. Please note that although we try and keep our stock levels high of these knives, there can sometimes be a one-two week delay if they need to be made.
|
|
Compact Skinner NZ$195 (incl. GST)
A 110 mm / 4 1/2 inch long compact skinner. Made using an inletted half tang.
Model
# CSKN
|
|
Skinner NZ$195
(incl. GST)
A 125 mm / 5 inch long "Green River" style skinner.
Model
# SKN
|
| |
|
|
Boning / utility knife NZ$195 (incl. GST)
Intended as a general purpose farmer's knife, but also useful as a hunting knife for those who prefer this style.
Model
# BON
|
|
|
|
|
| Zedteq
Pig Stickers - Handmade in New Zealand |
Zedteq currently offer a dedicated pigsticker and a general purpose / pigsticking knife, both with 180 mm (7 inch) blades. Note the handle of the general purpose / pigsticker knife is of Jarrah. Please note that although we try and keep our stock levels high of these knives, there can sometimes be a one-two week delay if they need to be made.
|
