Hornady Dies

Updated September 2010

 All prices are in New Zealand Dollars with 12.5% GST included.
Overseas customers not liable for GST, divide NZ$ by 1.125
Currency Conversion Website: www.xe.net/ucc/

	Presses:		Accessories - Page 1:
	Lock-N-Load Classic		Scales & Tricklers
	Lock-N-Load Auto		Powder Measure & Accessories
	Lock-N-Load Case Feeder & Accessories		Case Trimmer & Accessories
	50 BMG Press and Accessories		O.A.L Gauge & Modified Cases
			Bullet Comporator & Headspace Gauge
	Dies Page 1:
	Hornady Die Accessories		Accessories - Page 2:
	Neck Size & Taper Crimp Dies		Lubricants
	Custom A-Max Bullet Seating Stems & RCBS Style Expander Assemblies		Bullet Pullers
			Case Care Accessories
	Dies Page 2:		Hornady Books
	Series I Dies		Shooting Accessories
	Series II Dies
	Series III Dies		Accessories - Page 3:
			Primer Accessories
	Dies Page 3:		Case Tumbler Accessories
	Series IV Specialty Dies		Measuring Devices
	Series V Specialty Dies		Neck Turning Tool
	Match Grade Dies
	50 BMG Dies
	RCBS Full Length Die Sets

Hornady Reloading Dies & Accessories

Miscellaneous Die Accessories

MicroJust Seating Stem NZ$49 (incl. GST) Model # 044090 Add the MicroJust™ to any New Dimension seating die to precisely set bullet seating depth in .001" increments. Achieve accurate bullet seating depth for benchrest accuracy and consistency without the extra cost of another die. Hornady Die Sets already include inline seater. Simply replace the standard seating adjustment stem with the MicroJust seating stem. Quantity: 1 2 3 5 10		Shell Holders NZ$12 (incl. GST) Please note: Write caliber of shell holder in comments on order form. Quantity: 1 2 3 5 10 Hornady Shell Holders are precision machined from solid steel then heat treated to perform flawlessly for the life of the press. They fit all other Hornady accessories (Case Trimmer, Hand-Held Priming Tool, etc.). Hornady steel shell holders also fit most other brands of reloading presses.
Shell Plates for Pro-jector and Lock-N-Load NZ$69 (incl. GST) Model # 392610-29 Quantity: 1 2 3 5 10 Shell plates for Lock-N-Load AP and Pro-Jector™ are available to fit most calibers. Each shell plate will also hold additional calibers with the same case head dimensions. Current shell plates are designed to fit Lock-N-Load® AP™ (both EZ-Ject and wire ejector models) and Pro-Jector™ presses.		Extension Shell Holder NZ$32 (incl. GST) Quantity: 1 2 3 5 10 Hornady Shell Holders are precision machined from solid steel then heat treated to perform flawlessly for the life of the press. They fit all other Hornady accessories (Case Trimmer, Hand-Held Priming Tool, etc.). Hornady steel shell holders also fit most other brands of reloading presses.
Universal Decapping Cap NZ$72 (incl. GST) Model # 050085 Universal Decapping die: Hornady’s new Universal decapping die is designed for decapping cartridge cases prior to sizing them. Its tough decapping rod has no problems decapping even tough crimped military cartridge cases. Works with 223 Remington and larger cartridges. NOT for use with Berdan primed cases. Quantity: 1 2 3 5 10		Die Wrench NZ$15 (incl. GST) Model # 396490 Fits the flats of the New Dimension dies spindle assembly, lock rings and die body. Quantity: 1 2 3 5 10
Custom A-Max Bullet Seating Stems NZ$26 (incl. GST) Model # 397100-09 Cal: .22 cal 30 cal (155-178gr) 30 cal (208gr) 6.5mm cal 6mm cal 7mm cal Quantity: 1 2 3 5 10		New Style Decapping Pins NZ$4 (incl. GST) Model # 390222 Quantity: 1 2 3 5 10
Original Decapping Pins NZ$2.50 (incl. GST) Model # 060008-9 Size: Small Large Quantity: 1 2 3 5 10		Spare Die Box NZ$8 (incl. GST) Model #544600 New Style Large Die Box Quantity: 1 2 3 5 10
Sure-Loc Lock Ring NZ$8 (incl. GST) Model # 044000 Sure-Lock® Lock Rings Lets you make precise adjustments of all standard 7/8"-14 dies and accessories. LOCK RING: Clamps around the whole die. Can’t damage the threads. Applies constant pressure across the threads to hold the ring in place. Most other die rings lock by jamming a set screw directly into the threads. WRENCH FLATS: Remove and replace dies without pliers ruining the lock ring. Quantity: 1 2 3 5 10		Sure-Loc - 6pack Lock Rings NZ$39 (incl. GST) Model # 044000 Sure-Lock® Lock Rings Lets you make precise adjustments of all standard 7/8"-14 dies and accessories. LOCK RING: Clamps around the whole die. Can’t damage the threads. Applies constant pressure across the threads to hold the ring in place. Most other die rings lock by jamming a set screw directly into the threads. WRENCH FLATS: Remove and replace dies without pliers ruining the lock ring. Quantity: 1 2 3 5 10
Zip Spindle Kit Straight Wall & Pistol NZ$21 (incl. GST) Model # 043402 * Designed for large caliber trimming * Threaded to help eliminate spindle slippage Quantity: 1 2 3 5 10
Zip Spindle Kit (17-20) NZ$21 (incl. GST) Model # 043401 The Hornady Custom Grade New Dimension Die Zip Spindle Kit is the ideal kit for the reloader looking to convert their older Hornady Sizing dies to utilize the new threaded spindle design. This kit includes a threaded spindle and a threaded spindle collet. Quantity: 1 2 3 5 10
Zip Spindle Kit (22-45) NZ$21 (incl. GST) Model # 043400 The Hornady Custom Grade New Dimension Die Zip Spindle Kit is the ideal kit for the reloader looking to convert their older Hornady Sizing dies to utilize the new threaded spindle design. This kit includes a threaded spindle and a threaded spindle collet. Quantity: 1 2 3 5 10
Zip Spindle Rods Only NZ$12 (incl. GST) Model # 398567 The Hornady Custom Grade New Dimension Die Zip Spindle Kit is the ideal kit for the reloader looking to convert their older Hornady Sizing dies to utilize the new threaded spindle design. This kit includes a threaded spindle and a threaded spindle collet. Quantity: 1 2 3 5 10

Neck Size Dies

Neck Size Dies All NZ$54 (incl. GST) Model # 046038-66 Neck sizing with this die can eliminate problems of excessive head space, and align the bullet perfectly with the bore, resulting in better accuracy and longer case life. Should only be used for bolt-action rifle cases. Auto-loading, lever and pump action rifles usually require full-length resizing. Caliber: 20cal 22cal 22cal PPC 22cal Short 220 Swift 257cal 270cal 270cal mag 30cal 30cal mag 30cal short 338 cal mag 35 cal 6.5cal 6.5cal short 6mm 6mm PPC 6mm Short 7mm 7mm mag 7mm short Quantity: 1 2 3 5 10

Taper Crimp Dies

Taper Crimp Dies NZ$41 (incl. GST) Model # 044170-2 For Calibers: 38 cal / 9mm, 40 S&W / 10mm, and 45 ACP Caliber: 38 cal / 9mm 40 S&W / 10mm 45 ACP Quantity: 1 2 3 5 10 This die removes the flare from the case mouth and crimps case mouth around the bullet while maintaining a sharp edge for proper head-space. Improves feeding of reloaded cases in semi-automatic handguns.		Taper Crimp Dies NZ$49 (incl. GST) Model # 044173-722 For Calibers: 400 Corbon and 460 S&W Caliber: 400 Corbon 460 S&W Quantity: 1 2 3 5 10 This die removes the flare from the case mouth and crimps case mouth around the bullet while maintaining a sharp edge for proper head-space. Improves feeding of reloaded cases in semi-automatic handguns.
Taper Crimp Dies NZ$57 (incl. GST) Model # 044176-702 For Calibers: 450 Bushmaster, 454 Casull, 475 Linebaugh, 500 S&W Mag Caliber: 450 Bushmaster 454 Casull 475 Linebaugh 500 S&W Mag Quantity: 1 2 3 5 10 This die removes the flare from the case mouth and crimps case mouth around the bullet while maintaining a sharp edge for proper head-space. Improves feeding of reloaded cases in semi-automatic handguns.

Custom A-Max Bullet Seating Stems & RCBS Style Expander Assemblies

Custom A-Max Bullet Seating Stems NZ$26 (incl. GST) Model # 397100-7 For Calibers: 22 cal, 30 cal (155gr-178gr), 30 cal (208gr), 6.5mm, 6mm, 7mm Caliber: 22 cal 30 cal (155-178gr) 30 cal (208gr) 6.5mm 6mm 7mm Quantity: 1 2 3 5 10 This replacement seating stem is the perfect addition for the reloader utilizing specialty Hornady bullets like the popular FTX bullet or the supper accurate A-Max bullet. Just take out the seating stem that was installed in the Custom Grade New Dimension Seating Die and install this stem. These stems are designed for use with the caliber and bullet type listed in the description only. Additionally these stems will only work with Hornady Custom Grade New Dimension Seating Dies.		RCBS Style Expander Assemblies - for Cartridges: 219 Zipper- 220 Swift NZ$65 (incl. GST) Model # 044691 Make your RCBS size die easier and more convenient to use. Designed to fit RCBS Elliptical Dies. The carbide expander ball provides chatter-free neck expansion, while reducing the need for inside neck lubrication. Also includes hardened steel elliptical expander, the same found on our New Dimension™ Dies, which reduces neck stretching and leaves inside of neck extra smooth. Quantity: 1 2 3 5 10
RCBS Style Expander Assemblies - for Cartridges: 243 Win - 6MM-284 NZ$118 (incl. GST) Model # 044692 Make your RCBS size die easier and more convenient to use. Designed to fit RCBS Elliptical Dies. The carbide expander ball provides chatter-free neck expansion, while reducing the need for inside neck lubrication. Also includes hardened steel elliptical expander, the same found on our New Dimension™ Dies, which reduces neck stretching and leaves inside of neck extra smooth. Quantity: 1 2 3 5 10		RCBS Style Expander Assemblies - for Cartridges: 30-30 - 300 Win Mag NZ$118 (incl. GST) Model # 044697 Make your RCBS size die easier and more convenient to use. Designed to fit RCBS Elliptical Dies. The carbide expander ball provides chatter-free neck expansion, while reducing the need for inside neck lubrication. Also includes hardened steel elliptical expander, the same found on our New Dimension™ Dies, which reduces neck stretching and leaves inside of neck extra smooth. Quantity: 1 2 3 5 10

Quick Link to Page Two, Hornady Custom Dies