Hornady Presses

	Presses:		Accessories - Page 1:
	Lock-N-Load Classic		Scales & Tricklers
	Lock-N-Load Auto		Powder Measure & Accessories
	Lock-N-Load Case Feeder & Accessories		Case Trimmer & Accessories
	50 BMG Press and Accessories		O.A.L Gauge & Modified Cases
			Bullet Comparator & Headspace Gauge
	Dies Page 1:
	Hornady Die Accessories		Accessories - Page 2:
	Neck Size & Taper Crimp Dies		Lubricants
	Custom A-Max Bullet Seating Stems & RCBS Style Expander Assemblies		Bullet Pullers
			Case Care Accessories
	Dies Page 2:		Hornady Books
	Series I Dies		Shooting Accessories
	Series II Dies
	Series III Dies		Accessories - Page 3:
			Primer Accessories
	Dies Page 3:		Case Tumbler Accessories
	Series IV Specialty Dies		Measuring Devices
	Series V Specialty Dies		Neck Turning Tool
	Match Grade Dies
	50 BMG Dies
	RCBS Full Length Die Sets

Hornady Lock-N-Load Classic Press

Lock-N-Load Classic Press   NZ$302 (incl. GST) Model # 085001 Quantity: 1 2 3 5 10 Includes: Primer Catcher and three Lock 'n Load Die Bushings. Dies and Shell holders sold seperately. Four ways Lock-N-Load™ Classic can improve your reloading: 1) SPEED - Lock-N-Load™ Technology lets you switch dies to a new caliber and begin reloading again in seconds. Automatic priming is hands-off and trouble free. The angled frame gives you easier access to your cartridges. 2) CONSISTENCY - Lock-N-Load Bushings let you adjust your dies once, then lock the setting into place, for consistent reloads every time. 3) PRECISION - The CNC machined die and ram openings create near perfect alignment of the ram and die, so cases are lined up properly with the dies at all times. This precision translates into greater accuracy. The strong, rigid frame also provides the stability necessary for precision reloading. 4) VERSATILITY - With Lock-N-Load, one press can handle multiple calibers with ease. There’s no need to purchase multiple presses so you can leave your dies in place. Your dies will remain exactly as you set them, within their Lock-N-Load Die Bushings.   Lock-N-Load Classic Kit   NZ$752 (incl. GST) Model # 085006 Quantity: 1 2 3 5 10 Includes: LNL Classic Loader, LNL Powder Measure, Digital Scales, Hornady Handbook, Three LNL Die Bushings, Primer Catcher, Positive Priming System; Handheld Priming Tool, Reloading Block, Deburring Tool, Powder Trickler & Funnel, One shot case lube. Four ways Lock-N-Load™ Classic can improve your reloading: 1) SPEED - Lock-N-Load™ Technology lets you switch dies to a new caliber and begin reloading again in seconds. Automatic priming is hands-off and trouble free. The angled frame gives you easier access to your cartridges. 2) CONSISTENCY - Lock-N-Load Bushings let you adjust your dies once, then lock the setting into place, for consistent reloads every time. 3) PRECISION - The CNC machined die and ram openings create near perfect alignment of the ram and die, so cases are lined up properly with the dies at all times. This precision translates into greater accuracy. The strong, rigid frame also provides the stability necessary for precision reloading. 4) VERSATILITY - With Lock-N-Load, one press can handle multiple calibers with ease. There’s no need to purchase multiple presses so you can leave your dies in place. Your dies will remain exactly as you set them, within their Lock-N-Load Die Bushings.       Dust Cover for Lock-N-Load Classic Press NZ$38 (incl. GST) Model # 100008 Dust covers are the perfect accessory to keep reloading equipment clean and working properly. They also help keep make sure a reloading bench stays neat and orderly. Quantity: 1 2 3 5 10   Lock-N-Load Die Bushing  NZ$8.50 (incl. GST) Model # 044096 Lock-N-Load lets you switch from one die to another and begin reloading in seconds. No threading dies in and out or adjusting is necessary. The positive locking action of the bushings holds the dies in rock solid, perfect alignment. You'll want a Lock-N-Load bushing for every die you use. Quantity: 1 2 3 5 10       Lock-N-Load Primer Feed System NZ$88 (incl. GST) Model # 095210 Includes both large and small primer tubes. Use with our Positive Priming System and there’s no more fumbling with primers— priming is 100% hands off. Quantity: 1 2 3 5 10   Lock-N-Load Press RCBS Conversion Kit  NZ$32 (incl. GST) Model # 044099 Simply insert a Hornady bushing into your RCBS® Rock Chucker or other reloading press using a 1-1/4-12 thread, and you’re ready to take advantage of Hornady’s Lock-N-Load technology. It’s the easiest way to get the most out of your competitive reloading press. The Lock-N-Load Conversion Kit includes two die bushings and one conversion bushing. Quantity: 1 2 3 5 10       Lock-N-Load Press Conversion Bushing  NZ$23 (incl. GST) Model # 044095 Simply insert a Hornady bushing into your RCBS® Rock Chucker or other reloading press using a 1-1/4-12 thread, and you’re ready to take advantage of Hornady’s Lock-N-Load technology. It’s the easiest way to get the most out of your competitor's reloading press. Quantity: 1 2 3 5 10

Hornady Lock-N-Load Auto Progressive Press

Lock-N-Load Auto Progressive EZject Press NZ$986 (incl. GST) Model # 095100 Quantity: 1 2 3 5 10 The Lock-N-Load® AP™ with NEW EZject™ system loads at a rate of up to 500 rounds per hour, and features the quickest change-over of any progressive press. The Lock-N-Load® AP™ is a professional-grade, auto-indexing, 5-station progressive press that features Our patented Lock-N-Load® bushing system as well as a host of other features -- detailed below --that make it much more attractive than other, more expensive presses, such as the Dillon XL650.		Lock-N-Load Auto Progressive EZject Conversion Kit NZ$50 (incl. GST) Model # 095207 Quantity: 1 2 3 5 10 Optional EZ-JECT conversion kit for Lock-N-Load AP presses with a serial number of 7000 or greater. This kit includes: Sub-plate, Allen screws, Spent primer drop tube tool For more information on this product visit: http://update.hornady.com/support/faqs/reloading
Dust Cover for Lock-N-Load Auto Progressive Press   NZ$44 (incl. GST) Model # 095200 Dust covers are the perfect accessory to keep reloading equipment clean and working properly. They also help keep make sure a reloading bench stays neat and orderly. Quantity: 1 2 3 5 10		Large Cartridge Catcher for L-N-L Auto Progressive Press  NZ$11 (incl. GST) Model # 480038 A large capacity catcher comes standard with the L-N-L AP Press. This extra large capacity catcher holds up to 1/3 more completed cartridges. . Quantity: 1 2 3 5 10
Lock-N-Load Auto Progressive Case Retainer Spring 1pk NZ$7 (incl. GST) Model # 392363 Quantity: 1 2 3 5 10		Lock-N-Load Auto Progressive Case Retainer Spring 3pk NZ$14 (incl. GST) Model # 392370 Quantity: 1 2 3 5 10

Lock-N-Load Case Feeder 220 Volt   NZ$732 (incl. GST) Model # 095302 The Hornady Lock-N-Load AP™ is now automatic! With the highest torque motor in the industry and an extra large case bowl, it can feed up to four times as many cases as other case feeders. Reload hundreds of rounds per hour! Adapts to your existing AP press and feeds every cartridge. Changeovers are quick and simple, and the case feeder easily disengages. This model for 220 volt 50 hz electrical systems (Europe etc) Quantity: 1 2 3 5 10		Lock-N-Load Subplate APCF Retrofit Kit   NZ$165 (incl. GST) Model # 398309 The Hornady L-N-L Automatic Case Feeder will work with your present L-N-L AP once you install this subplate. Quantity: 1 2 3 5 10
Case Feeder Plate   NZ$65 (incl. GST) Model # 095310-16 Case Feeder Plate comes in: Small Pistol Large Pistol Small Rifle Large Rifle Size: Small Pistol Large Pistol Small Rifle Large Rifle Quantity: 1 2 3 5 10		Dust Cover for Lock-N-Load Case Feeder   NZ$46 (incl. GST) Model # 095203 Dust covers are the perfect accessory to keep reloading equipment clean and working properly. They also help keep make sure a reloading bench stays neat and orderly. Quantity: 1 2 3 5 10

50 BMG Press by itself  NZ$753 (incl. GST) This single-stage press features our exclusive Lock-N-Load technology in the ram. With it you can turn your shell holder over to ram prime, then move the shell holder to the top plate.  Once the holder and ram prime are set, they stay that way. A quick change to a Lock-N-Load  bushing makes switching over from ram prime to die use faster, too. Together, these features will significantly speed up and improve your .50 caliber BMG reloading. Solid construction ensures years of reliable reloading. Quantity: 1 2 3 5 10		50 BMG Press Kit   NZ$1337 (incl. GST) Lock-N-Load 50 CAL BMG Kit includes a Lock-N-Load™ 50 CAL BMG press and Hornady Custom Grade New Dimension 50 Cal. Die Set, created from select steel and heat-treated for durability and a lifetime of reloading. Dies are guaranteed never to break or wear out from normal use. Includes a 50 BMG Press, Shell Holder, two Lock-N-Load adapter bushings, Ram Prime system and a 50 BMG Die set. Quantity: 1 2 3 5 10
50 BMG Powder Measure  NZ$224 (incl. GST) Includes an oversized hopper tube, 265 grain capacity metering unit and a see-through extended drop tube so you can confirm a complete powder drop into the case. Quantity: 1 2 3 5 10		50 BMG Trim Die   NZ$292 (incl. GST) Created from select steel and heat-treated for durability and a lifetime of reloading, the Hornady Custom Grade New Dimension 50 Cal. File Trim Die is so well-crafted, it’s guaranteed never to break or wear out from normal use. Quantity: 1 2 3 5 10
50 BMG High Capacity Metering Kit 80/265  NZ$138 (incl. GST) Load up to 265 grains of powder in a single drop with Hornady’s High  Capacity Metering Kit. The kit’s two metering units have capacities of 80 to 180 grains and 165 to 265 grains of powder, and come with the clear drop tube and large hopper tube. The clear drop tube visually ensures a complete powder drop. An extended hopper tube is also included so you can reload more rounds between refills of powder. Fits Hornady Lock-N-Load Powder Measure.   Quantity: 1 2 3 5 10		50 BMG Primer Seating Gauge   NZ$200 (incl. GST) Consistently seating primers is now a science with the Hornady BMG Seating Gauge. This precision instrument uses a dial indicator to measure the depth of each primer pocket and the height of each primer. That allows you to consistently seat the primer with the anvil just touching the bottom of the primer pocket every single time — letting you take full advantage of firing pin energy and get a truly consistent result. Quantity: 1 2 3 5 10
50 BMG 2 Die Set NZ$572 (incl. GST) Created from select steel and heat-treated for durability and a lifetime of reloading, the Hornady Custom Grade New Dimension 50 Cal. Die Set is so well-crafted, it’s guaranteed never to break or wear out from normal use. Quantity: 1 2 3 5 10		50 BMG Seating Die NZ$191 (incl. GST) Quantity: 1 2 3 5 10
50 BMG Full Length Die NZ$370 (incl. GST) Custom Grade New Dimension Full Length Sizer Dies feature polished elliptical expanders that reduce or eliminate neck stretch. The hardened steel decapping pin won't break even when depriming cases with crimped primer pockets. They feature a Zip Spindle with a series of light threads cut on the spindle and spindle collet to eliminate slippage and make it easier to tighten the spindle lock when making adjustments. Shellholder sold separately. Quantity: 1 2 3 5 10		50 BMG Neck Die NZ$370 (incl. GST) Created from select steel and heat-treated for durability and a lifetime of reloading, the Hornady Custom Grade New Dimension 50 Cal. Neck Size Die is so well-crafted, it’s guaranteed never to break or wear out from normal use. Quantity: 1 2 3 5 10
50 BMG Lock Ring Assembly NZ$35 (incl. GST) Quantity: 1 2 3 5 10		50 BMG Deburring Tool NZ$102 (incl. GST) Extra large diameter. Precision ground and made from all tool steel. The ultimate in 50 cal. accessories. Quantity: 1 2 3 5 10
50 BMG Shell Holder   NZ$63 (incl. GST) Our Shell Holders are precision machined from solid steel then heat treated to perform flawlessly for the life of the press. They fit all other Hornady accessories (Case Trimmer, Hand-Held Priming Tool, etc.). Hornady steel shell holders also fit most other brands of reloading presses. Quantity: 1 2 3 5 10		50 BMG Shell Head Adapter NZ$63 (incl. GST) Reload any caliber ammo on your .50 BMG Press with standard shell holders. Especially useful for shooters reloading long cartridges which require a very long stroke. Quantity: 1 2 3 5 10