All prices are in New Zealand Dollars with 15% GST included.
Overseas customers are not liable for GST, divide NZ$ by 1.15 and then use the below Currency Converter:



 
 
  
Hornady Dies 


 

  Presses:   Accessories - Page 1:
Lock-N-Load Classic Scales & Tricklers
Lock-N-Load Auto Powder Measure & Accessories
Lock-N-Load Case Feeder & Accessories Measuring Devices
50 BMG Press and Accessories Case Trimmer & Accessories
    O.A.L Gauge & Modified Cases
  Dies Page 1: Bullet Comparator & Headspace Gauge
Hornady Die Accessories    
Neck Size & Taper Crimp Dies   Accessories - Page 2:
Custom A-Max Bullet Seating Stems & RCBS Style Expander Assemblies Lubricants
    Bullet Pullers
  Dies Page 2: Case Care Accessories
Series I Dies Hornady Books
Series II Dies Shooting Accessories
Series III Dies    
      Accessories - Page 3:
  Dies Page 3: Primer Accessories
Series IV Specialty Dies Case Tumbler Accessories
Series V Specialty Dies Neck Turning Tool
Match Grade Dies    
50 BMG Dies    
RCBS Full Length Die Sets    

 

Hornady Reloading Dies
Hornady Series IV Specialty Dies - Pistol
           
30 Luger
357 B & D / 44
357 Herrett
357 SIG
38 S & W
38/40 Win

400 Cor-bon
44 Auto Mag
44/40 Win
45 Schofield
50 Action Exp
50 Alaskan
500 Linebaugh
7.5 Swiss Ord
8mm Lebel Rev
9x23
Hornady Series IV Specialty Pistol Die Set NZ$167 (incl. GST)
Caliber: Quantity:
Model #'s 546336-591

This die set includes Custom Grade New Dimension (CGND) Full Length Sizer and a CGND Seating Die. The Full Length Die now features a Zip Spindle with a series of light threads cut on the spindle and spindle collet to eliminate slippage and make it easier to tighten the spindle lock when making adjustments. Improve bullet seating and accuracy with the CGND Seating Die that applies a roll crimp. Comes packaged in a plastic storage box with two Sure-Loc rings. Shellholder is sold separately.

 
     
Hornady Shell Holder NZ$12 (incl. GST)
Caliber: Quantity:
Hornady Shell Holders are precision machined from solid steel then heat treated to perform flawlessly for the life of the press. They fit all other Hornady accessories (Case Trimmer, Hand-Held Priming Tool, etc.). Hornady steel shell holders also fit most other brands of reloading presses.
 
     
Hornady Series IV Specialty Dies - Rifle

Calibers in Alphabetical Order:
10.3 x 60
17/222
17/223
20 Tactical
20 VT
218 BEE
219 Zipper
22 K-Hornet
22 PPC
22 RCFM-JET
22 Sav HP
22/250 Ackley Imp
22/6mm
224 Wby
25 Rem
25/20 Win
25/284

250 Sav
256 Win
280 Ackley Imp
30 Herrett
30 Merrill
30-30 Ackley Imp
30/06 Ackley Imp
30/378
30/40 Krag
300 H&H
303 Sav
308 Norma Mag
32 Win Spl
32/40 Win
325 WSM
33 Win
338 Lapua Rifle
338/06
338/378 Wby
348 Win
350 Rem Mag
358 N Mag
358 Win
375 Win
376 Steyr
378 Wby
38/55 WCF
404 Jeffery
416 Rem Mag
416 Rigby
416 Ruger
416 Taylor
416 Wby
450 Nitro Express
450/400 NE 3"
458 Soccom
460 Wby
470 Nitro Express
5.6 x 52R
5.6x57
5.6x50 Mag
5.7x28 FN
50/70 Govt
500 Nitro Express
6 x 47 Rem
6.5 CARC
6.5 Jap
6.5 Mann
6.5 Rem Mag

6.5 x 57
6.5 x 68
6.5/06
6.5mm TCU
6mm Int
6mm Rem BR
6mm PPC
6mm TCU
6mm/223
6mm/284
7 x 30 Waters
7 x 47 Helm
7 x 61 S&H
7 x 64
7 x 65R
7.35 Carc
7.5 Swiss K31

7.62 Russ
7.92 x 33 Kurz
7mm Merrill
7mm Rem BR
7mm STW
7mm TCU
7mm / 223 Ingram
8 x 50R Lebel
8 x 60S
8 x 68S
8.15 x 46R
8mm/06
8x56 Hung-mann
9.3 x 47R
9.3 x 57
9.3 x 62
Hornady Series IV Specialty Rifle Die Set NZ$171 (incl. GST)
Caliber: Quantity:
Model # 546202-412

This die set includes Custom Grade New Dimension (CGND) Full Length Sizer and a CGND Seating Die. The Full Length Die now features a Zip Spindle with a series of light threads cut on the spindle and spindle collet to eliminate slippage and make it easier to tighten the spindle lock when making adjustments. Improve bullet seating and accuracy with the CGND Seating Die that applies a roll crimp. Comes packaged in a plastic storage box with two Sure-Loc rings. Shellholder is sold separately.

 
     
Hornady Shell Holder NZ$12 (incl. GST)
Caliber: Quantity:
Hornady Shell Holders are precision machined from solid steel then heat treated to perform flawlessly for the life of the press. They fit all other Hornady accessories (Case Trimmer, Hand-Held Priming Tool, etc.). Hornady steel shell holders also fit most other brands of reloading presses.
 

Hornady Series V Dies Pistol + Specialty Rifle

Pistol:
454 Casull
460 S&W
480 Ruger / 475 Linb
500 S&W

Rifle:
450 Bushmaster
Hornady Series V Dies - 4 Die Set NZ$167 (incl. GST)
Caliber: Quantity:

Model #'s 546547-85

Includes CGND Nitride Full-length Sizing Die, CGND Adjustable Case Mouth Expander Die and CGND Seater Die with roll crimp. The sizer die features Titanium Nitride sizing rings that eliminate case sticking and require no lubrication. The Zip Spindle is set in place with a collet lock and secured with light threads for precision decapping and easy adjustment. Comes packaged with a plastic storage box and three Sure-Loc Rings, Shellholder sold separately.

 
     
Hornady Series V - Full Length Die NZ$72 (incl. GST)
Caliber: Quantity:

Model #'s 046584-699

These dies feature Titanium Nitride sizing rings that eliminate case sticking and require no lubrication. The Zip Spindle is set in place with a collet lock and secured with light threads for precision decapping and easy adjustment. Shellholder sold separately.

  Hornady Series V - Seating Die NZ$56 (incl. GST)
Caliber: Quantity:

Model #'s 044158-700

Improve bullet seating and accuracy with the Custom-Grade New Dimension Seating Die. Only Hornady offers inline sliding alignment sleeve seaters as standard equipment with all dies. Just add the Microjust Seating Stem and you have a Micrometer Seating Die! A roll crimp is standard or a taper crimp for auto-loading handgun dies. Hornady also makes their seating dies useable with today?s specialty bullets like their popular A-Max and FTX bullet lines with the addition of the appropriate Die Seater Stem (sold separately)

     
Hornady Series V - Expander Die NZ$45 (incl. GST)
Caliber: Quantity:
Model #'s 044556-701

For use with Custom Grade New Dimension Dies. The Hornady Custom Grade New Dimension Expander Die is a great die for loading straight-wall cartridges. The CGND Expander Die expands the case mouth to allow for easier bullet seating. Shellholder sold separately.

  Hornady Series V - Shell Holder NZ$12 (incl. GST)
Caliber: Quantity:
Hornady Shell Holders are precision machined from solid steel then heat treated to perform flawlessly for the life of the press. They fit all other Hornady accessories (Case Trimmer, Hand-Held Priming Tool, etc.). Hornady steel shell holders also fit most other brands of reloading presses.
     
Hornady Match Grade Dies & Bushings
 
Neck Bushings not included
 
Hornady Match Grade Neck Die NZ$97 (incl. GST)
Caliber: Quantity:

Model #'s 544231-59

For ultra-precise alignment and match-winning performance from your press, you’ll want Hornady’s Match Grade New Dimension™ Dies. The neck size die features interchangeable, self-centering neck size bushings (available in .002” increments) that eliminate the chance of oversizing your case necks and overworking the brass.

Calibers: 22-250, 223 REM, 308 Win, 6mm BR, 6mm PPC

  Hornady Full Length Match Grade Die NZ$97 (incl. GST)
Caliber: Quantity:

Model #'s 544229-51

For ultra-precise alignment and match-winning performance from your press, you’ll want Hornady’s Match Grade New Dimension™ Dies. The neck size die features interchangeable, self-centering neck size bushings (available in .002” increments) that eliminate the chance of oversizing your case necks and overworking the brass.

Calibers: 22-250, 223 REM, 308 Win, 6mm PPC, 243 Win

     
Hornady Full Length Match Grade Die Set NZ$182 (incl. GST)
Caliber: Quantity:

Model #'s 544650-51

For ultra-precise alignment and match-winning performance from your press, you’ll want Hornady’s Match Grade New Dimension™ Dies. The full-length size die features interchangeable, self-centering neck size bushings (available in .002” increments) that eliminate the chance of oversizing your case necks and overworking the brass.

This die features interchangeable neck sizing bushings. Select the bushing your cartridge requires to complete your Match Grade Die.

Calibers: 6.5 Creedmoor, 6.5mm x 47 Lapua, 6mm x 47 Lapua

  Hornady Match Grade Die Bushings NZ$41 (incl. GST)
Caliber: Quantity:

Model #'s 594338-266

For ultra-precise alignment and match-winning performance from your press, you’ll want Hornady’s Match Grade New Dimension™ Dies. The neck size die features interchangeable, self-centering neck size bushings (available in .002” increments) that eliminate the chance of oversizing your case necks and overworking the brass.

Calibers: .242, .244, .246, .248, .260, .262, .264, .266, .284, .286, .288, .290, .332, .334, .336, .338

     
Hornady 50 Caliber BMG Dies
     
Hornady 50 BMG 2 Die Set NZ$640 (incl. GST)
Quantity:
Model # 544460

Created from select steel and heat-treated for durability and a lifetime of reloading, the Hornady Custom Grade New Dimension 50 Cal. Die Set is so well-crafted, it’s guaranteed never to break or wear out from normal use.

  Hornady 50 BMG Full Length Die NZ$414 (incl. GST)
Quantity:
Model # 044589

Custom Grade New Dimension Full Length Sizer Dies feature polished elliptical expanders that reduce or eliminate neck stretch. The hardened steel decapping pin won't break even when depriming cases with crimped primer pockets. They feature a Zip Spindle with a series of light threads cut on the spindle and spindle collet to eliminate slippage and make it easier to tighten the spindle lock when making adjustments. Shellholder sold separately.

 
     
     

RCBS Full Length Die Sets
RCBS Full Length Dies Sets NZ$98 each (incl. GST)
Quantity: Calibre:
.22 cal Hornet
.223 cal
.260 cal
6.5 x 55 cal
.270 cal
7mm 08 cal
308
30-06 cal



                

Copyright © 1998-2020 Hunting and Outdoor Supplies.  All Rights Reserved.
Updated December 2019